Vulcan Electronics

Necesito asistencia para vulcan que no pasa de la leyenda de borrar TPM

Trate de apagar mi computadora y al momento de hacerlo la pantalla se puso en blanco que hago?¿

Hello Marcos,

Thank you for your patience. Please use the volume up and down buttons to clear the TPM module. If that doesn't work try to connect an External USB keyboard to clear the TPM module. 

Thank you for your understanding. 

Best Regards,

Matthew

Mi tableta vulcan vta1006m16 no entra nomas aparese vulcan y de ai se pone negra la pantalla y le quise poner teclado y le aplasto supr y f2 y esc y no entra a los bios

Hello Jose,

Thank you for your patience. Please try reinstalling windows on your TRAVELLER tablet using our recovery instructions below. If you still can't get into the BIOS please try to charge the device for at least 24 hours before booting the device up again. 

  Thank you for your patience. Please follow the steps below to restore your  device to the original state. 

 

1. Download Rufus format partition tool from the link  below. 

 

https://rufus.akeo.ie/

 

2. Plug in an empty Flash Drive  that has at least 8 to 16 GB free into extra computer or device.

 

3. Run RUFUS and select the  following parameters.  

 

A. Device - Select your USB flash drive

B. Partition Scheme and target  system type - GPT partition scheme for UEFI computer

C. File System - NTFS

D. Cluster Size - Leave as  Default

E. New Volume Name - Winpe - it must be named this otherwise it won't work properly.

 

See photograph below as  reference. Please make sure you uncheck the box that says – create a bootable  disk using ISO. 

 

 

4. Download the Recovery drive  for your device at the link below. 

 

https://support.vulcanelectronics.com/support/discussions/topics/6000042984

 

5. Unzip files and then move all  files in folder (should be at least 10 to 20 files and folders) TO the  formatted FLASH DRIVE. 

 

6. Turn off your Device and plug  in your OTG cable and the Flash drive. Please use a USB 4 port HUB so you can  use a keyboard if necessary.  

 

7. Turn on device and constantly  press the ESC button to get into BIOS. 

 

8. Go to the last menu option and in the boot override  section arrow down to "UEFI: <Thumbdrive>" and hit enter.   If your device does not show boot override, you will need to manually set the  Thumbdrive as first in priority under the boot options, then save/exit. It  should then boot up and perform the flash and shutdown. 

9. Remove Flash drive before restarting. 

PLEASE LET ME KNOW IF THIS WORKED FOR YOU. 

Best Regards,

Matthew